Automatic sampler Ecotec STANDART 270
Field of application
It is designed for fast and efficient sampling of all agricultural grains. The Ecotec STANDART 270 automatic grain sampler ensures correct and fast sampling from vehicles over the entire height of the product bulk to the bottom.
Function
The two-flow probe of the Ecotec STANDART 270 is lowered into the grain to be sampled to the bottom of the vehicle body. It picks it up along the entire height of the embankment and sends the sample to the receiving hopper located in the laboratory using a vacuum turbine.
Accommodation
The Ecotec STANDART 270 is a free-standing sampler that can be mounted on a foundation. The operating range reaches 270° of rotation and covers diameters from 4.4 m to 8.8 m.How it works
The Ecotec STANDART 270 sampler is fully hydraulic! Thanks to the soft-start system developed by our company, the sampler will work smoothly, quickly and without unnecessary jerking. Hydraulic samplers do not require constant and expensive maintenance and are more reliable in operation! The Ecotec STANDART 270 is equipped with a heated 120 bar hydraulic station. Thanks to this power, 100% penetration of the sampling product of any moisture content is guaranteed, which is not the case with samplers from other manufacturers!
Technical characteristics of the automatic grain sampler model Ecotec STANDART 270
Technical characteristics of the automatic grain sampler model Ecotec STANDART 270
Purpose | Automated sampling of all crops |
Construction | One support console with hydraulic drive |
Efficient grain collection area | up to 8800 mm |
Support height | 4200 mm above the level of the foundation of the fastener |
Console boom extension | from 2420 mm to 4440 mm |
Length of the sampler probe | 2700 mm |
Swing angle of the console boom | 270 degrees |
Power supply | 380 volts, 3 phases |
Hydraulic drive | 2 200 W |
Capacity of the oil station | 120 Bar |
Heating the oil | from 2420 mm to 4440 mm |
Power of the pneumatic turbine | 2 200 W |
Length of the pipeline | 30 meters as standard |
Pipeline diameter | 38 mm |
Pipeline material | Polyurethane |
Probe design | Two-stream (optional: two-level slotted) |
Sampler probe material | Stainless food grade steel |
Storage hopper capacity | 20 l |
Management | Stationary multifunctional control panel (optional: remote control) |
Control of the manipulator | Equipped as standard with a video camera on the probe and a 22-inch monitor (optional: video recording system) |
Soft start system | It is supplied as standard |
Alert systems | It is equipped as standard with a voice warning system, flashing lights and a signaling system |
Operating temperature range | -25 ° C + 50 ° C |
Parking the sampler | Automatic in either direction |
Hydraulic oil | Tank with 20 liters of hydraulic oil with a very high viscosity index |
Manufacturer's warranty | 12 months |
Additional options that are purchased separately and are not included in the standard package |
|
Video recording system: (3 cameras (external); Video recorder with hard disk; Monitor 22 inches FULL HD; Cable products; Adapters; Cranks). |
|
System of touching the bottom of the car body and hitting the cross beam | |
Automatic system for returning samples to the vehicle | |
Remote control with a range of up to 100 meters. | |
Two-level slit probe (the ability to sample both the entire product bulk and only the lower part of the body). |
Standard delivery set Ecotec STANDART 270
Scope of delivery:
- The sampler assembly;
- Receiving hopper for samples;
- 2.2 kW turbine with bracket and filter;
- Sample transportation pipe – 30 m;
- Cable products – 30 m;
- Two-flow probe made of stainless steel 2700 mm;
- Control panel with 10 m cable;
- Automation cabinet;
- Video surveillance system for the sampling area (22-inch monitor and camera);
- Voice notification system with microphone and loudspeaker.
Scope of delivery:
- The sampler assembly;
- Receiving hopper for samples;
- 2.2 kW turbine with bracket and filter;
- Sample transportation pipe – 30 m;
- Cable products – 30 m;
- Two-flow probe made of stainless steel 2700 mm;
- Control panel with 10 m cable;
- Automation cabinet;
- Video surveillance system for the sampling area (22-inch monitor and camera);
- Voice notification system with microphone and loudspeaker.