Ответим на все вопросы
и проведем бесплатную консультацию
Field of application
It is designed for fast and efficient sampling of all agricultural grain crops. The Ecotec LEGO Automatic Grain Sampler will ensure correct and fast sampling from vehicles over the entire height of the embankment.
Function
The dual-flow probe (included as standard) of the Ecotec LEGO sampler is lowered into the grain to be sampled to the bottom of the vehicle body. It picks it up along the entire height of the mound and sends the sample to the receiving hopper located in the laboratory using a vacuum turbine.
Accommodation
The Ecotec LEGO sampler is mounted separately on a foundation. The operating range reaches 350° of rotation and covers diameters from 4.4 m to 8.8 m.
An exceptional feature
This model of sampler can be easily and cost-effectively upgraded into an automatic grain sampler on a rail “Ecotec RAIL”. During the modernization, two additional columns for the rail, a 12-meter rail and equipment for moving the carriage of the unit along the rail will be installed.
How it works
The Ecotec LEGO sampler is fully hydraulic! Thanks to the soft start system developed by our company, the sampler will work smoothly, quickly and without unnecessary jerking. Hydraulic samplers do not require constant and expensive maintenance and are more reliable in operation! The Ecotec LEGO is equipped with a heated 120 bar hydraulic station. Thanks to this power, 100% penetration of the sampling product of any moisture content is guaranteed, which is not the case with samplers from other manufacturers!
Appointment | Automated sampling of all crops |
Construction | One support console with hydraulic drive |
Modernization | Possibility of further upgrading to an Ecotec RAIL automatic sampler |
Efficient grain collection area | up to 8800 mm |
Support height | 2000 mm above the level of the foundation of the fastener |
Removal of the console boom | from 2650 mm to 4420 mm |
Length of the sampler probe | 2700 мм |
Angle of rotation of the console boom | 350 degrees |
Power supply | 380 volts, 3 phases |
Hydraulic drive | 2 200 Вт |
Capacity of the oil station | 120 Bar |
Heating the oil | Комплектується у стандартній комплектації |
It is supplied as standard | 2 200 W |
Length of the pipeline | 30 meters as standard |
Pipeline diameter | 38 mm |
Pipeline material | Polyurethane |
Probe design | Two-stream (optional: two-level slotted) |
Sampler probe material | Stainless food grade steel |
Storage hopper capacity | 20 л |
Management | Stationary multifunctional control panel (optional: remote control) |
Control of the manipulator | Equipped as standard with a video camera on the probe and a 22-inch monitor (optional: video recording system) |
Soft start system | It is supplied as standard |
Alert systems | It is equipped as standard with a voice warning system, flashing lights and a signaling system |
Operating temperature range | -25 °C + 50 °C |
Parking the sampler | Automatic in either direction |
Hydraulic oil | Tank with 20 liters of hydraulic oil with a very high viscosity index |
Manufacturer's warranty | 12 months |
Additional options that are purchased separately and are not included in the standard package |
|
1. Video recording system: (3 cameras (external); Video recorder with hard disk; Monitor 22 inches FULL HD; Cable products; Adapters; Cranks). |
|
2. System of touching the bottom of the car body and hitting the cross beam |
|
3. Automatic system for returning samples to the vehicle | |
4. Remote control with a range of up to 100 m. | |
5. Two-level slit probe (the ability to sample both the entire product bulk and only the lower part of the body). |
Scope of delivery:
Scope of delivery:
Ответим на все вопросы
и проведем бесплатную консультацию
Відповімо на всі запитання
і проведемо безкоштовну консультацію